This project is a multi building MEP Design-Build project at DFW Airport, and consists of one 401,280 sf speculative warehouse and one 431,320 sf speculative warehouse.
Also included with this project is offsite infrastructure work within the City of Grapevine.

Single building MEP Design-Build project at DFW Airport, this project consists of the construction of a 145,090 sf speculative warehouse.
Also included with this project is offsite infrastructure work within the City of Grapevine.

This project includes two 24′ clear, speculative tilt wall distribution centers totaling 137,338 sf.?

Phase one of this project includes the demolition of an existing 250,000 sf building with associated pavement and site improvements.
Phase two consist of new construction of a 328,000 sf air conditioned tilt wall distribution facility with 13,000 sf being office finish out.

This project is a two building development of speculative distribution warehouse totaling 1,017,513 sf. Envelopes are load bearing tilt-up concrete panels on reinforced concrete pier foundations. Exterior to be painted concrete panels, glass and stone veneer.?

This project consist of a three building development of speculative office/warehouse. Building 1 clear height is 24′ and Buildings 2 & 3 are 28′ clear. Envelopes are load bearing tilt-up concrete panels on reinforced concrete foundations. Exterior to be painted concrete panels, glass and thin brick veneer. Building slabs to be 6″ concrete with 10 mil vapor barrier. Roof to be white 45mil TPO mechanically fastened on rigid insulation. Roof structure to be metal deck, steel bar joists and girders supported by steel columns. ESFR wet-pipe fire protection system will be installed per NFPA-13 requirements.

This project is a 648,000 SF, 36′ clear height, speculative tilt wall industrial warehouse with large retaining walls and offsite public road improvements.

This project includes three speculative tilt wall industrial facilities, including two cross-dock (36′ clear) and one rear-load (32′ clear), totaling 1,231,318 sf on an 74-acre site in the Passport Industrial Park at DFW Airport.

This project includes two speculative single load industrial tilt wall facilities (28′ and 32′ clear), totaling 356,500 sf on an 31-acre site at the SWC of East Glad Rd and West Airfield Dr at DFW Airport.

This project includes four speculative tilt wall industrial facilities, including two cross-dock (36′ clear) and two front-load (32′ clear), totaling 1,058,995 sf on an 86-acre site in the Carter Industrial Complex in South Fort Worth.

This project includes a 155,000 sf, 32′ clear tilt wall office/warehouse building.

This project is an 85,333 SF single-story tilt wall shell office/industrial warehouse consisting of 8 inch concrete tilt panel walls on a reinforced pier foundation, 6 inch concrete slab on grade, 30 foot clear steel structure, metal decking, .60 mil TPO roofing over rigid insulation, ESFR wet pipe sprinkler system, site paving, security fencing, and landscaping. Dock package includes dock seals, bumpers, overhead doors, and z-guard track protection. Building exterior is a textured paint coating. Exterior walls utilize concrete reveals, formliner and accent painting to provide architectural appeal. Windows and entrances are aluminum frame with 1 inch insulated, tinted, low-E glass. The interior slab at the southern portion of the warehouse is 4 feet lower, allowing for interior secure drive-in storage.
Samaritan’s Purse also included Tenant Improvement, which scope included all offices, restrooms, breakrooms, and warehouse fit-out. This Coppell location serves as the organization’s Texas-Lousiana Regional Office to help support their humanitarian aid and international relief efforts.

This project is a 100,000 SF tilt wall expansion for an existing user, including 40,000 SF of freezer/cooler.

This project is a 128,000 SF 32′ clear speculative tilt wall distribution center.

This project includes two speculative tilt wall distribution centers totaling 140,000 sf with sitework and infrastructure for two future buildings.

This project includes two 100,029 sf tilt wall industrial buildings.

This project consist of an 86 acre Design-Build industrial development with five speculative tilt wall industrial building complex, with clear spans ranging from 32’to 36?, totaling 1,404,400 sf at DFW Airport.?

An approximate 400 acre infrastructure project for DFW Airport for future industrial development at Passport Park including earthwork, site utilities, roadways, duct banks, street lighting and LID landscaping improvements.?

This project is a 305,760 SF 32′ clear tilt wall Industrial facility at Sunfield Industrial Park.

This project consist of a 50,000 SF tilt wall indoor sports complex with 80′ bays.

This project consist of two speculative tilt wall industrial facilities totaling 138,865 SF.

This project consist of two speculative tilt wall industrial facilities totaling 193,935 sf.

This project consist of a 40′ clear, 1,000,584 SF tilt wall industrial facility at DFW Airport.

36? clear tilt wall industrial warehouse building totaling 703,000 sf.

This is one of the first properties to start within the 216-acre development, Frisco Park 25 in Frisco, TX.
This project consist of a 159,908 sf 32′ clear tilt wall industrial building.

121,188 sf tilt wall warehouse and office space.

215,000 SF?32′ clear steel distribution facility, which includes 100? clear span bays to accommodate 6-15 ton 90? span overhead cranes and 15,000 SF Office.

New 1,200 linear foot manufacturing assembly line for Caterpillar, Inc.

Project includes design management and construction of the new concrete structure with steel supporting system and steel plate surfaces.

840,000 SF concrete tilt wall engine assembly and manufacturing facility.

Includes 40,000 SF of office space.

This 40-acre International Logistics Center which includes three tilt wall warehouse buildings totaling 646,796 SF.

Two tilt wall warehouse buildings totaling 1,220,000 SF.

Two tilt wall warehouse buildings totaling 488,564 sf.

231,754 SF 32′ clear tilt wall speculative distribution center.
Includes ground up construction with site work.

351,000 SF, 32′ clear tilt wall speculative distribution center and remaining site work from phase 1.

New, ground up 373,860 SF tilt wall 32′ clear, cross-dock distribution center.

430,500 SF 32′ clear tilt wall logistics and light assembly facility.

106,000 SF turbine engine manufacturing and logistics facility.
Project includes: insulated tilt wall panels, overhead cranes, 20? deep test pits, 2 test cells, 1 with 130? tall custom exhaust stack and 30,000 SF of office interiors.